Frozen pipes are one of the most common plumbing emergencies in Colorado winters. The good news: you can often thaw a frozen line yourself if you catch it early, and simple steps now prevent most freeze damage.
Signs Your Pipes Are Frozen
The clearest sign is no water coming out of a tap, even though your water is on. Usually only one sink, shower or toilet loses pressure first—the one farthest from your main water entry or in the coldest part of your home.
Look for frost or ice on exposed pipes in your basement, crawl space, garage or under sinks. If you see a bulge or crack in a pipe, that's a burst; shut off your main water valve immediately and call a local plumber.
Frozen pipes often happen in uninsulated spaces like exterior walls, attics, or crawl spaces. If it's been below freezing for more than a day and a room has no heat, that's your highest-risk area.
What to Check First
Turn on the affected faucet and listen for even a small trickle of water. Any flow means the pipe isn't fully blocked yet.
Check all the pipes you can see nearby—trace cold-water lines from that tap back toward the main line or water heater. Feel the pipe with your hand (carefully; it may be very cold). A frozen section will feel hard and ice-cold, not just cool.
Make sure the water is actually on at the meter or main shutoff valve. If your whole house has no water pressure, the freeze is likely at your main line or service entrance; that needs a professional.
If you have a water softener or pressure tank, check whether it's the problem instead—but a true freeze usually affects one area, not the whole system.
Need plumbing help now?
We connect you with an independent local plumbing specialist.
How to Thaw a Frozen Pipe Right Now
Never use a blowtorch or open flame; you risk fire and pipe damage. Safe heat sources are a hair dryer, heat lamp, heating pad, or towel soaked in hot (not boiling) water wrapped around the pipe.
Start at the faucet and work backward along the frozen section. Apply heat for a few minutes, then check the tap again. It may take longer than you expect—be patient.
If the pipe is in a wall or inaccessible, turn up the heat in that room to its maximum and open cabinet doors under sinks to let warm air circulate. This takes longer but often works overnight.
Once water starts flowing, leave the faucet slightly open for a few minutes. A slow drip keeps pressure low and helps prevent a burst if another frozen section breaks free. Then close it and monitor for leaks over the next hour.
When to Call a Local Plumber
If heat doesn't thaw the pipe within an hour, or if you see water dripping inside walls or ceilings, stop and call a pro. Continuing to apply heat can damage drywall or create a hazard.
Call immediately if you see ice or bulges on a pipe, hear a rushing sound inside walls, or notice water pooling under sinks or in the basement. These are signs of a burst, and every minute counts.
If your whole house loses water pressure, the freeze is probably at your main line, which you should not try to thaw yourself. A specialist has tools and experience to locate the freeze and thaw it safely.
If you have an older home, pipes in hard-to-reach spaces, or frequent freeze issues, a plumber can suggest permanent fixes like insulation, heat tape, or rerouting lines.
What happens when you call
Call (number added on your domain)
Tell us what's going on and where you are.
Get matched
We connect you with an independent plumbing provider that serves your area.
Get it handled
Talk options with the pro directly and decide what's right for you.
Talk to a local specialist today
We connect you with an independent local plumbing specialist.
Services
Prefer a call back?
Request a quote and a local provider can reach out to you. You can also call to discuss your needs.
📞 Call (number added on your domain)